Product Description
The ID-Mounted beveling operation utilizes an expandable mandrel which is slid into the open end of the pipe.
A draw nut is tightened, which expands the mandrel blocks up a ramp and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the material from the end, a bevel is produced which conforms to the angle predetermined by the angle ground into the bit. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling.
With the light weight, it is portable and can be used on-site working situation. The machine is applicable to end face machining of various grades of metal pipes, such as carbon steel, stainless steel and alloy steel. It is widely applied in heavy type pipe lines of Petroleum, chemical natural gas, power supply construction, boiler and nuclear power etc.
| Model Type |
Spec |
Capacity Inner Diameter |
Wall thickness |
Rotation Speed |
| ID MM |
Standard /MM |
1) TIE Driven
By Electric
2) TIP Driven
By Pneumatic |
30 |
18-28 |
<=15 |
50r/min |
| 80 |
28-76 |
<=15 |
55r/min |
| 120 |
40-120 |
<=15 |
30r/min |
| 159 |
65-159 |
<=20 |
35r/min |
| 252-1 |
80-240 |
<=20 |
18r/min |
| 252-2 |
80-240 |
<=75 |
16r/min |
| 352-1 |
150-330 |
<=20 |
14r/min |
| 352-2 |
150-330 |
<=75 |
14r/min |
| 426-1 |
250-426 |
<=20 |
12r/min |
| 426-2 |
250-426 |
<=75 |
12r/min |
| 630-1 |
300-600 |
<=20 |
10r/min |
| 630-2 |
300-600 |
<=75 |
10r/min |
| 850-1 |
600-820 |
<=20 |
9r/min |
| 850-2 |
600-820 |
<=75 |
9r/min |
Features for ISY SDC TCM ID Mounted Pipe Beveling Machine
1,Cold cutting, without influence the material of the pipe
2,ID mounted, adopt T structure
3,Varity of beveling shape: U, Single-V, double-V,J beveling
4,It can also be used for repairing inner wall and deep hole processing.
5,Working range: Each model with a wide working range for operation.
6,Driven motor: Pneumatic and Electric
7,Customized machine is acceptable
Machine Packing for ID Mounted Pipe Beveling Machine
Trade Shows
Certificates
Order Guide
- Choose the right Model
- Confirm your electric power supply ( Voltage, frequency and phase)
- Confirm the beveling angel required
- Confirm the welding joint required (U, V, Double V or Compound preparation)
- Advise your pipe material ( Carbon steel, stainless steel or others)
Welcome to contact with us for more information!
Audited Supplier 
){kind=link}